Despite the advances of the hubcaps, as far as image is concerned, the fixation of the same continues to be improved. That is why it is necessary to resort to certain tricks, with which to better secure these decorative elements of your vehicle.
If we take a look at any of the vehicles we find parked on the street, it is likely that they have alloy wheels. However, this does not mean that hubcaps are already a part of history, since they are still common in many vehicles on the market. The problem with these elements is that, despite all that has been advanced in their design and appearance, they still have considerable fragility in their fastening system. So much so that a badly caught pothole and with some depth blows the hubcap of the tire and leads us to lose the part.
Luckily, this problem also has a home remedy, with which we can fix the hubcaps safely and without losing them. Because it is quite annoying to spend time buying the best hubcaps ( In this link you will find several products to analyze ) to lose them because of a pothole. In any case, when implementing any of these systems, it is key to remember that the hubcaps should not be permanently fixed, since sooner or later you will have to access the hardware to change the tire or repair the same.
In recent times, cable ties have become a very practical element that has a large number of applications. From the use to fix cables and different elements together to the use of the police to make arrests, the versatility and resistance of these small pieces of molded plastic is more than evident.
To securely attach a hubcap to your vehicle, it is necessary to see both the area where the metal rim has the holes and the spaces in the hubcap and how these can fit. Once these spaces have been located, we only have to pass the flange through the interior of that hole, but taking care that the clamping area of the flange is on the outside. We complete the fastening by closing the flange on the hubcap, giving it the maximum possible tension and firmness. We will repeat the procedure on at least four of the sides of the wheel, preferably cross or X, cutting the excess plastic from the flange. Do not forget to keep the valve area well protected, to avoid later problems.
Use of adhesives
Another alternative is the use of lightweight adhesives, which are strong enough to hold the hubcaps and prevent loss, but also retain the ability to remove the hubcap once the tire needs to be handled. These fastening elements include silicone and other medium-hard adhesives, although we must always bear in mind that the chosen product is suitable for joining plastic and metal, which will be the two elements to be glued.
Additionally, this adhesive must be resistant to humidity, for rainy days or when we wash the car. And we cannot forget that the adhesive must be easy to remove or cut, when it is necessary to carry out maintenance work on your tires. Something that will lead you to have to replace the adhesive again, once you finish the maintenance of the wheels.
If you have some time and skill, you may be interested in designing an anti-theft bolt system for your hubcaps. To do this, you will need two or four metal bolts of a certain size and thickness, as well as some washers and screws that match them. Before starting, it should be mentioned that this system is only used for those flat hubcaps that have spaces that can allow the bolts to pass through, since drilling them is a complex task and may end up fracturing them.
To carry out this assembly, you will have to start by welding the bolts on the corresponding area of the rim, verifying that this weld is resistant and that it runs in the correct areas of the rim. Once the bolts have been welded and cooled, all we have to do is mount the wheel on the vehicle, put the hubcap in place, fitting the bolts in place, and complete the assembly. For this, both the washers and the closing screws are mounted, which will prevent you from having problems both when fixing the hubcap and removing it when necessary.
Use of anti-theft hubcaps
To avoid having to fight with hubcaps, there is one more alternative, which is the use of anti-theft hubcaps. These hubcaps have the advantage of having a design similar to that of alloy wheels, so that the hubcaps are attached directly to the studs on which the rim rests. By being fastened with the wheel fixing bolts, it is impossible for the hubcaps to be stolen and, additionally, it is also impossible for them to get lost, unless they break or break.
The only drawback of these hubcaps is that their assembly is somewhat more complex than that of conventional metal rim and flange models, since to fit the hubcaps it is necessary to remove the bolts that hold the tires and tighten them later. A process that you must repeat when carrying out maintenance operations, although with the advantage that this process is more standardized, unlike what happens when using the bolts or the adhesive system that we have discussed. In addition, you do not have to replace that adhesive or reposition the flanges to leave the hubcap fixed in place again.
By the way, if you finally bet on this option, it is essential that you verify that the format of the hubcap is adequate, both due to the diameter of the rim and the placement of the bolts with respect to the position of the hubcap. If you don’t, you may not be able to mount it.