Although this component is often overlooked, the suspension system cannot function properly without it. A damaged strut mount can cause strange noises, rough handling, and general driving discomfort.

Do you think your car may have a damaged strut mount? If you have one or more of the symptoms below, you may be correct.

Symptoms and Common Failures of Suspension Struts

The strut mount is a part of the vehicle’s suspension system that connects the strut to the chassis or body of the vehicle. Holds the strut firmly in place when the car is in motion . The mount also isolates tire noise and vehicle vibrations, dampening bumpy roads and harsh driving conditions.

Pay attention to the following symptoms to determine if a bad strut mount is causing problems in your vehicle, as there are some common suspension point failures that always show up, and we’ll help you identify them.

1- Strange noises

If you hear rattling or screeching from the suspension system while driving, this could mean that the mount has worn out. The noise comes from two or more metallic components colliding with each other without any kind of isolation. The front strut mounts can also make noise when you turn the steering wheel.

2- Irregular wear of the tires

If your tires are wearing unevenly, this could be a sign that your strut mount needs to be replaced. A damaged strut mount can wobble and not keep your wheels in alignment, causing uneven wear on your tires as you drag them against the pavement.

3- Excessive vibration

In addition to connecting the struts to the chassis, the strut mounts also provide insulation. If they are damaged, they will not be able to dampen noise and vibrations.

A bad strut mount will probably not have any rubber for isolation, leading to excessive vibrations while driving.

4- Steering problems

On some vehicles, the strut mount also serves as the kingpin . This means that when it fails, the smoothness of the steering movement and the response time can be affected. This can lead to steering problems, since the steering and suspension systems are interconnected.

5- Corrosion

This is one of the common failures of the suspension points. Since most strut mounts are made of metal, they can easily succumb to corrosion when exposed to moisture.

6- Worn rubber

If the rubber inside the mount has cracked or disintegrated in any way, it’s time to replace the strut mount . Keep an eye out for this symptom when you visually inspect your suspension system.

7- Excessive movement

The strut mount is supposed to help cushion the impact of bumps in the road on the car. If it malfunctions, it could come loose and not hold the strut in place. This could cause abnormal bouncing of the vehicle and excessive movement while driving.

8- Worn strut

If you notice your vehicle’s struts wearing out faster than they should, a faulty strut mount may be the culprit. A perfectly functioning mount should support the weight of the vehicle and keep everything in place.

A faulty mount can’t, causing the strut to drop and hit other suspension components. This can lead to premature wear and expensive repairs.

What causes suspension mounts to go bad?

Strut mounts can be damaged by normal wear and tear. Because it is a wear item, the suspension mount will require replacement after a certain number of miles or years.

Other causes of a faulty strut mount include impact damage and contamination. Minor accidents and bad weather can affect the strut mount and cause it to fail prematurely.

At the first sign of wear, consider changing your vehicle’s strut mounts immediately. It is highly recommended that you replace both shock mounts on both sides of your vehicle for a smooth and smooth ride. Often when one support fails, the other is not far behind.

Avoid unexpected problems in your car by replacing all the shock mounts at the same time.

What to look for in a new suspension mount?

When looking for a new suspension mount, the wide variety of options available can be confusing. To help you narrow down your options, here are some factors to keep in mind:

1- Application

Always ensure fit before purchasing a strut mount for your vehicle’s suspension. The part must be compatible with the year , make and model of your vehicle to ensure functionality and easy installation.

2- Quality

The new strut mount must be robust and resistant to premature wear, since it is a fundamental component in the suspension system of your vehicle. You can choose a replacement made from the same material as your factory installed strut mount or invest in an upgraded strut mount.

If you opt for the latter option, consult your mechanic before making a decision to ensure that the upgraded part is compatible with your vehicle .

Be sure to choose a high-quality mount to ensure long-term functionality. Regain your car’s handling performance and ride quality with a durable strut mount replacement.

How much does a hanger bracket replacement cost?

The price of an aftermarket suspension bracket replacement ranges from $10 to $350. However, this price range is for the piece only. You will have to spend more to have it installed by a professional.

The cost of a new strut mount also depends on its brand, series, intended location, and quantity. It can be purchased individually, in sets, or as part of a kit.