Common Hyundai Failures: Problems, Breakdowns And Solutions!
Many types of cars have known recurring problems. Today, the Internet is a very useful source of information and solutions, and finding out that other owners of the same model have the same problems will reassure you in some cases. For this reason, we have brought you a list of common Hyundai failures , so that you can be aware of their constant breakdowns.
Here we are going to talk about the problems that Hyundai owners often have, and what you can do to fix the problems with your car.
What are the most common Hyundai failures?
It is not a secret that no car manages to avoid breakdowns and problems, it is for this reason that we have decided to list the common Hyundai failures, where the most prominent are the following:
1. Steering wheel lock
This is a problem that has been reported quite often by Hyundai owners. It occurs when the power steering fails. Normally there should be a warning light indicating the problem, however in these cases the warning light does not come on.
What should you do?
The steering lock may appear to have locked, but most of the time it is still free. All you have to do is turn the steering wheel a little more in the same direction that the steering wheel is already turned, and then start the car.
2. Engine shuts down
This is a problem that appears mainly on the Hyundai Santa Fe (especially those made between 2010-2012). It is a very strong experience. The motor can decide to shut down at any time or speed . And in any place. When the engine dies it also means no power steering, no power brakes, no acceleration.
What should you do?
This is a Throttle Position Sensor (TPS) that has failed and needs to be replaced.
3. Chipped “self-healing” paint
Hyundai’s self-healing paint is advertised to heal small scratches. It’s a very interesting concept and, in principle, it works. When UV rays hit the paint, the parts of the paint melt and fill in the gaps. Unfortunately, paint often peels off, leaving large, ugly, uncovered areas. This issue primarily affects the 2006-2016 Santa Fe, Sonata and Elantra.
What should you do?
The same thing you would do if it was normal paint damage: go to a professional vehicle painter and they will repair it for you.
4. Noise when starting
It has been reported that there can be a persistent noise when starting the engine of a Hyundai (mostly Sonata). If this noise lasts more than 5 seconds, it is better to turn off the engine .
What should you do?
If this noise lasts more than 5 seconds, it is best to turn off the engine. There could be a problem with the timing chain tensioner. It may have to be changed.
5. Hesitation when accelerating
There have been complaints about a hesitation under acceleration, mostly in the Hyundai Elantra. This occurs when the engine has already warmed up, there is a delay of about two seconds after stepping on the accelerator before it moves. The check engine light does not always come on.
What should you do?
In most cases, it has been established that the oxygen sensor is faulty. You may need a new one.
6. Automatic transmission shift problems
A delay in changing between different gears has been reported in the Hyundai Sonata and Veracruz. Sometimes the gear gets stuck and won’t shift to the next one. And occasionally jumps into neutral gear. Especially this last problem can cause difficult situations on the road.
What should you do?
First, check that the transmission fluid level is okay. If it isn’t, you’ll need to top it up with Hyundai-approved transmission fluid. If the level is not a problem, the fluid may need to be replaced. Also, transmission software updates often help resolve the issue.
To end
Whether you plan to fix the problem yourself or decide to leave it to the professionals and take your car to the shop, either way, you can save money by buying used parts. You will know the correct way to act after reading about common Hyundai failures.
