Common Chevrolet Camaro Failures: Problems, Solutions And More!

How good is the Chevrolet Camaro?

Buyers give the Chevrolet Camaro a reliability rating of 3.5 out of 5.0, which puts it 21st out of 24 midsize cars. Meanwhile, some surveys give the 2021 model year a quality and reliability score of 80 out of 100, which is considered average.

While muscle cars typically cost more to maintain and repair than cars of a similar size, the Chevy Camaro has average ownership costs. Sure, your repairs are often more serious than expected. However, the low frequency of these problems means that the Camaro doesn’t need major repairs very often.

Regardless of model year, a Camaro can easily achieve 100,000 miles or more by following Chevrolet’s recommended maintenance schedule and promptly replacing any old or damaged parts.

Common failures of the Chevrolet Camaro

Manufactured from 1967 to the present, with a production hiatus during 2003-2009, the Camaro has numerous model years and variants to choose from. Depending on the year of the unit, Chevrolet Camaro reliability problems can vary in both frequency and severity.

In a comparison of model years, the 2010 Chevrolet Camaro received the most complaints. It was also considered the worst model year for several reasons. Last but not least, Chevrolet Camaro engine problems are considered the worst problem overall.

Here are common Chevrolet Camaro faults:

1. Electrical problems

There are many great things about the 2014 Chevrolet Camaro, like its stylish interior and exterior features. However, drivers have complained of problems with its electrical system.

His air conditioning, car alarms, climate control, parking light, radio, stereo, and turn signals all turned out to be prone to malfunctions. They may work randomly or stop working altogether , even though the parts are fine.

These problems can appear when the driver slams on the brakes, uses the turn signals, or turns on the heated seats or rear window defroster. In some cases, replacing and programming the body control module that manages all of these parts can resolve the issues.

2. Problem with the key

Driving the 2014 Chevrolet Camaro should be fun from start to finish. But what happens when you shift into park and turn off the engine, only to have your key get stuck in the ignition switch? Some drivers have complained of spending too much time and effort pulling the key out or waiting for the switch to release it.

3. Engine failure

The 2012 Chevrolet Camaro gets its speed from its powerful engine, but the propeller on some units can develop serious problems. Some drivers have reported engine knocking, stalling, loud noises when starting after a shutdown, and loss of power . The car can also vibrate similar to slipping gears in a manual transmission. In the worst case, the engine can stall and shut down the entire Camaro.

While the StabiliTrak light and check engine lights would sometimes come on to inform the driver, in other cases there was no warning at all.

4. Problems with the distribution chain

Some drivers have reported that their 2010 Chevrolet Camaro timing chain failed too soon. A poorly calibrated oil change notification sensor did not alert them that their engine needed an oil change. As a result, the heat produced by the engine can cause the timing chain to stretch.

This caused the shafts to get out of sync and caused problems such as loss of engine power and a rough idle. In some cases, the stretching chain could break, throwing metal through the engine.

Warning signs of a bad timing chain include an illuminating check engine light . The engine control module may also log OBD-II trouble codes P0008 and P0017.

5. Airbag light problems

The airbag lights on the 2010 Chevrolet Camaro give occupants a heads up about the current status of the critical safety feature. However, some owners noticed that the airbag lights often flashed on and off, even if no one was in the seat.

The passenger side light used to develop this problem, although some owners reported that the driver side light was not immune. Technicians were unable to determine the exact cause of the problem ; Some drivers believed that a faulty airbag sensor pad could have triggered the airbag lights.

6. Defects in secondary air injection control valves

The 2002 Chevrolet Camaro’s secondary air injection system helps control the vehicle’s emission levels. Unfortunately, some drivers discovered that both of the system’s check valves could become restricted, causing reduced airflow and activating the check engine light.

This problem can also appear on some Camaros built between 1997 and 2001. It is recommended that both AIR check valves be replaced, even if only one valve developed a problem.

7. Problems with the radio

Listening to your favorite song on the radio adds to the joy of driving your 2013 Chevrolet Camaro. However, the radio on some units proved problematic. Some drivers reported that the radio screen went blank, went dark, or turned off. The radio itself worked, but the faulty touch screen prevented the use of OnStar for navigation. Other times, the radio would not work properly or stop working altogether .

In conclusion

With regular maintenance and proper care, the Chevy Camaro can give you many years of great driving. Whether you’re a new driver or a veteran of the road, it’s worth reading up on the most common Chevrolet Camaro problems. This will help you prevent problems from escalating and make the most of the life of your car.