Car air compressor maintenance

Car air compressors allow us to inject a quantity of compressed air for some jobs where it is required to inflate a tire, a mattress or feed a compressed paint gun. However, to enjoy their optimal operation, you will need to provide them with proper maintenance when they require it.

 

We are all aware that the tasks we do at home can become a bit exhausting and annoying, since they ask us to give a lot of effort in a sustained way over a long period of time. On those occasions, even if we put all our effort into it, we will end up completely exhausted and with an unsatisfactory result, since to carry out some tasks, it will be essential to have a system that allows us to manipulate compressed air at will.

An air compressor is a tool that is designed and developed to extract the air that is in the environment, then store it and compress it inside the boiler that is an internal tank of the compressor. With that compressed air, you can start different pneumatic-type tools, as well as perform simpler tasks, such as inflating vehicle tires, in addition to being able to spray paint to clean or change the color of the walls of your house.

However, to use one of these tools and acquire the best air compressor of the moment , it is advisable to know how these devices work, in addition to that you must perform maintenance on this tool so that it can provide greater durability and have better performance when function.

 

How do air compressors work?

The principle of air compressors is to extract air from the environment, compress it in a boiler and make it available to use when we need it, giving us the possibility of releasing it through a flexible tube and regulating the pressure through the use of a practical pressure switch. To know how an air compressor works, it is very necessary to know what are the parts that make up an air compressor and how it works. 

In general, air compressors are made of three large pieces. First of all, of course, the most important part of this system is the compressor itself. It is a cylinder with a piston that is driven by a small electric motor, which allows it to take in the air from the environment and then compress it.

The reservoir tank is another of the fundamental parts in the operation of a compressor. The tank or boiler is a kind of reservoir or container where the flow of compressed air is stored, allowing it to be within reach when it is needed.

 

 

 

Last but not least, there is the control and supply equipment, which is the part of the system that is responsible for receiving the compressed air by the compressor piston that has previously been stored in the reservoir tank and, thanks To a pressure switch, it controls the level of pressure with which the compressed air will come out through the hose.

By knowing how air compressors work, it is very possible to know how to make the best use of them in any of the different DIY activities that you are going to do at home, be it inflating a couple of tires, cleaning the garden of the dried leaves of fall or even paint the walls of your house, using an air gun. Likewise, you can regulate the air outlet pressure, according to the object that requires the air flow.

 

How to use a compressor?

Since we know how an air compressor works, as well as the different parts that compose it, we recommend you learn to use this tool so that you can avoid any damage that we can do to ourselves and our work team.

First of all, if your air compressor model has wheels, you will need to assemble them before using the appliance. Next, proceed to install the air intake filter. Then, it will be necessary to remove and change the transport plug that is installed in the lid, which does have a hole. It is important to check the oil level in the crankcase, especially if it is the first time you use it. Through the charging hole, it must be filled with oil until it reaches the indicated level. Before plugging in, make sure the switch is off. Finally, proceed to turn on the air compressor and turn it off when you are done using it.

 

 

 

Maintaining an air compressor

Actually, properly maintaining an air compressor is a simple task, especially today, since these tools are being designed in a much simpler way, so they are very simple to use devices.

The maintenance of this tool is carried out in three basic processes of periodic care, so that we can allow these machines to continue to provide optimal service for a longer period of time. These procedures are: the maintenance or change of the air filter, the oil change and the extraction of the remaining compressed air inside the cylinder.

Actually, air filter maintenance is a very simple process. You will only need to unscrew the filter that is attached to the area above the compressor. Proceed to open the filter container, remove it and shake it so that you can remove all the dirt that may have accumulated.

For the oil change, it is recommended that, every 150 hours of work, an oil change is made to a compressor, so that it can preserve the lubricating characteristics that give it the possibility of operating at an adequate power.

In the last step, to extract the air that remains in the tank, it will be necessary to find the location of the plug that is somewhere in the lower area of ​​the tank. When this is achieved, you must unscrew it, allowing the remaining air in the tank to escape free, its exit being announced by a whistle that comes out of the tank opening.

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *