Best Modular Helmets Review 2021

Modular helmet – Buying Guide, Opinions and Analysis

 

When taking your motorcycle and wanting to move with it, the only essential requirement, and mandatory by law, is the use of a helmet. However, there is no legal regulation that indicates the minimum characteristics that one must meet, but we know that the modular ones offer a good level of security as well as comfort. Among the most popular of the moment, the LS2 FF325 is a modular helmet made with high-pressure thermoplastic technology, with a high level of protection and with a removable inner lining. On the other hand, with an integrated sun visor and quick release system, the Shark Openline in size M is a good alternative.

Shopping guide

 

Helmets are perhaps the most important accessory that you should use whenever you ride a motorcycle. Whether it is a long trip or a short walk within the city, this is a requirement that you must fulfill both to safeguard yourself from an unwanted accident and to avoid any type of fine.

If you don’t know how to choose one, we present the following guide to buying the best modular helmet in which we expose the most relevant characteristics when choosing a good and inexpensive model.

 

Price

One of the main factors that many users tend to take into account whenever they are choosing a new motorcycle helmet is their budget. However, whenever we talk about personal safety, the quality of the product is often more important than its value.

It is highly recommended that you look carefully at other aspects such as construction materials, the type of helmet and its field of vision, before worrying about how much it costs.

However, there are models on the market that offer an excellent relationship between quality and price, it is a matter of looking properly.

 

Modular or integral

In every comparison of modular motorcycle helmets, the type is one of the first characteristics to consider.

In the specialized market, there are basically two types of helmets: modular and integral.

While the integral models are composed of a single piece, which makes them safer, the modular models allow the chin guard to be raised to show the face uncovered, making them cooler and more comfortable, although with the disadvantage that they can be disassembled in a drop.

Therefore, consider your personal needs and tastes before making a choice.

 

materials

Another of the most important technical aspects that you should review before making a decision is the material with which the helmet is made.

There are a wide variety of alternatives, but most of today’s helmets are made with materials such as ABS, TPR polycarbonate, injected thermoplastic and technopolymer, so they are usually light and resistant.

As for the viewfinder, it is advisable to look, in addition to its quality, if it is made with UV filter and anti-scratch material. This will give you more visibility.

On the other hand, the material of the pads determines the comfort you will feel with the helmet on, so it is suggested that it be breathable, hypoallergenic and removable so that it can be washed from time to time.

 

Viewfinder

This component will determine the visibility you will have behind the wheel, so it is recommended to pay special attention. The visors of modular helmets usually have a double screen, one for normal vision and the second for solar, which allows driving with clear vision both day and night.

In addition, the width of vision can change from one helmet model to another, so you will have to consider how panoramic you want the visor and, even, if you use vision glasses, so that you can place them next to the helmet.

 

Pinlock

Another feature of the visors is the Pinlock, so if you are interested in acquiring a helmet to which an anti-fog screen can be adapted, it is essential that it have this feature.

This screen is very useful, as it prevents the helmet’s visor from fogging up, forming an air chamber between the visor and the screen that prevents condensation. If you want to move more freely, don’t hesitate to buy a helmet compatible with the Pinlock.

 

Ventilation

When making a choice, this is one of the aspects that determines how cool the helmet is. Therefore, before making a hasty purchase, check the ventilation system and number of air intakes the product has.

These inlets are usually located in the chin and upper head area, finding another opening at the rear of the helmet, but this has the utility of functioning as an air outlet, which allows adequate circulation in the part. internal. This keeps the helmet cool and dry at all times.

However, keep in mind that, with many or large air intakes, it is possible that the inside of the helmet is too cold, which may not be entirely pleasant in winter. For this reason, we recommend that you check well that there is no inadequate air intake.

 

 

 

Frequently asked questions

 

Q1: How to use a modular helmet?

To use a modular helmet, you must consider all the recommendations and suggestions to avoid accidental opening of the product. In addition, it is advisable to know the traffic laws, before misusing it.

Modular helmets must be opened to introduce the head through its lower part and then we will adjust the chin strap until it is well adjusted. Make sure the helmet feels properly on and does not move.

Remember to lower the visor before you start moving, especially since the improper use of a modular helmet is considered serious, obtaining fines of up to 200 euros, depending on the seriousness of the matter.

 

Q2: Which is better, a modular helmet or a full face one?

To know what type of helmet is better between modular and integral, it is necessary to consider some aspects, such as the use that you are going to give it and your comfort.

While full-face helmets have certain technical characteristics that make these models meet higher safety standards, modular models have the possibility of opening the chin guard and raising the visor to have the face uncovered while riding, which favors comfortable movement. in summer.

However, the integral ones tend to offer greater protection, since, if you fall, there is no possibility that the parts of the helmet will come off.

 

Q3: How do you open a modular helmet?

Due to the wide variety of models available on the market, to correctly open a modular helmet it is necessary to observe the opening system it incorporates.

On the one hand, some models include an unlocking system in the lower part of the chin guard, which allows you to use one hand to raise the visor.

On the other hand, there are models with a double release lever system that allow a higher level of security, blocking the visor to prevent accidental opening.

 

Q4: How to disassemble a modular helmet?

Each helmet model has its own way of disassembling, although they are very similar to each other.

While some models have a snap-off removal system, you may need to use an appropriate Allen wrench for the screws on the chin guard.

You start by disassembling the screen, which usually has a mechanism for easy removal. Flip the helmet over and remove the top padding, neck, and cheek pads, depending on what can be removed.

 

Q5: How to clean a modular helmet?

The first step you must take to properly clean a modular helmet is to separate each element to clean it independently. These components are: the foams, cheek pads, chin guard, interior padding, screen and helmet. In this way you will be able to access the most difficult areas.

You can put the plastic parts directly into the jet of water and rub with your hands to remove all the accumulated dirt. On the other hand, to access the most difficult corners, you can help yourself with an old brush, lathering and removing any remaining soap well and then leave it to air dry or gently wipe it with a microfiber cloth.

For all the internal fabric and padding of the helmet, depending on your model, you may be able to put it in a washing machine to achieve the best washing results.

 

Q6: How to adjust the modular helmet?

Helmets are the most important items to wear when traveling on a motorcycle, so the correct fit is vitally important to achieve greater safety and avoid fines or penalties that may affect you.

To adjust a helmet, the most important thing is to choose one with a suitable size for your body shape. Note that it should not be loose when turning the head.

Use the adjustment strap so that the helmet is correctly attached to your head by the chin, tightening it until it feels very firm. Finally, make sure to wear the clasp or clasp securely closed before starting your tour.

 

Q7: How to choose the size of a modular helmet?

To choose the correct size for your next modular helmet it is necessary to measure the size of the diameter of your head, placing one end of the rope or tape measure on the back of your head, raising the measurement up to a centimeter above the eyebrows.

In addition, you have to be very attentive to the shape of the shell and the thickness of the interior padding, which takes a bit of space from the helmet. However, it is important to remember that, with use, the padding gives way considerably, giving way to more internal space.

 

Leave a Comment

Your email address will not be published. Required fields are marked *