Best Jet Helmets Review 2021-Step by Step buying Guide

Jet Helmet – Buying Guide, Opinions and Analysis

 

When riding a motorcycle, prevention is very important, because you never know when an accident may happen; having the right protection can even save your life. Head trauma occurs in many accidents, but helmets help prevent these bruises from being too severe. Among the variety of products that are offered in the market, you will find Jet helmets, which are designed for those motorists who usually drive at different levels of speed. To choose the right model, you must take into consideration the design, which must adapt to your taste and needs. For example, the Shark Jet DrakIt has a protective screen that is anti-fog and anti-scratch, which prevents the helmet from generating visibility problems while you are driving. On the other hand, the NZI Vintage 3 helmet has a high-quality design, a comfortable front visor and an interior with which to give you a pleasant comfort.

Buying Guide – What is the best Jet helmet on the market?

 

The helmet is one of the most important elements for motorcyclists, it is not only about protection, it also has to do with aesthetics. If you want to choose the right model, you need to look at the different characteristics that they have. Next, we present you a guide to buying the best Jet helmet, which can be useful when making your purchase.

 

Protection

The main function of helmets is to protect your head as much as possible and to considerably reduce the chances of you suffering a serious injury, in the event that at some point you get to suffer an accident while driving.

Studies carried out by various organizations indicate that deaths from head contusions, during road incidents, are less likely to occur when you have adequate protection, for that reason, when making your comparison of Jet helmets you should make sure to check the level of security that each model offers you.

The helmet must not only avoid external blows, it also has to protect the internal part of the skull, as these blows can cause very serious injuries.

Many times, when a motorcycle accident occurs, in a few seconds the brain continues to move and can hit the walls of the skull.

Therefore, many manufacturers design these helmets with an internal or external shell that has the ability to absorb shock, this is because the exterior part converts the impact area into a larger area that allows energy to be distributed throughout the surface. .

Once this happens, the inner shell can deform or break, in order to absorb the greatest amount of energy before the blow reaches the head. The internal padding of the helmets helps to slow down the impact, in this way the head can gradually reduce its speed and internal damage will be less.

 

Certification

To give you the certainty that you actually have a secure model, many manufacturers are responsible for certifying their products through different standards. This feature can help you trust the model you purchase much more.

Among the different certifications you will find the ECE R22-05, which is mandatory in more than 50 countries. For this, the helmets are subjected to a series of highly rigorous tests.

An anvil is dropped on them to measure their level of shock absorption. They test that the strap and buckle slide the right way and are strong. Likewise, the helmet’s resistance to abrasion and deformation is taken into account.

Another certificate they give to helmets is the SHARP rating. It is a test to which the different models are subjected to review the level of security they provide. According to her, the products that only obtain one point are deficient, while the maximum score, in terms of efficiency, is 5.

During SHARP tests, 32 impact tests are carried out, to test what can happen when blows occur at different speeds and in different situations. In addition, several helmets of the same model are analyzed, in order to find out their different qualities, such as sizes.

Even when you are looking for an inexpensive product, you have to make sure that it is of quality and that it really guarantees your safety, for that reason it is important that you consider its certification and try to find the one that offers you the most security.

 

materials

The materials in which the helmets are made can define how much each model costs, in addition, they indicate the level of quality that a particular product has, for that reason, when making your choice, this is one of the aspects that does not you can stop checking.

One of the materials that is most used in its manufacture is polycarbonate, a resin characterized by its hardness, which allows it to be resistant to shocks, thermal deformation and weather conditions.

 

Design

In order to choose an optimal Jet helmet, another factor to consider is the design of each one.

You will find integral models, these cover the head, in addition, they have a screen to protect the upper part of the face and a mask that covers the lower part of the face, these provide more protection.

There are also helmets that only have the screen, this can be of different sizes and should provide you with a good level of visibility. There are manufacturers that make them anti-scratch and anti-fog.

There are models that are simpler and only offer protection to the head area, but leave the face exposed.

How to use a jet helmet

 

If you are a lover of motorcycles and speed, apart from having a powerful vehicle, you will also need certain implements to ride safely. Helmets are an alternative to keep your head protected in case of rollovers, avoiding severe bruises. So for those who are looking for a jet helmet, the best thing to do is inquire about how to use and preserve the life of the product.

 

 

 

Check the dimensions of the helmet

Take a tape measure and surround your head at the level of both the ears and the eyes; in this way you will obtain the size that the inside of the helmet should have so that it fits properly without bothering you. It is recommended that you do not choose a too loose equipment, since the material gives way with constant use.

 

Attach the pads

Fit the center and front pad on the inside of the helmet; Similarly, place the side upholstery. Finally, lock the pieces by pressing together the velcro strap system.

 

Install the screen

On the outer sides you will find two adjustment triggers that you must slide upwards, making it possible to fit the screen on both sides. Next, press down on the visor and move it up and down until you hear a clicking sound. This will be the indicator that the mechanism closed correctly.

 

Put on your helmet

Pull on the closure straps to expand the structure and facilitate placement. To do this, you must turn your head a little and insert it inside the helmet. It is important that the ears are attached to it and not bent, as it will cause you discomfort.

Also, check that the upper edge is above the level of the eyebrows, allowing adequate visibility when lowering the screen or wearing protective glasses.

 

Close the outer adjustment straps

After wearing the helmet, you will have to take the closure straps and adjust their length until they adapt to your chin. In the same way, adjust the quick-release pin.

 

Clean the structure

The first thing you need to do is remove the upholstery. To do this you have to separate the velcro straps and pull the pads back, so that they do not tear when removing them from the compartment.

Now, the cleaning process is recommended to be done manually, so you will only use neutral detergent to rub the pieces and you will have to rinse them under the tap with plenty of water, thus avoiding the use of the washing machine.

 

 

 

Hang the upholstery in a ventilated place

As they are padded pieces, it is prudent not to press them to remove the water at the end of the washing process, but rather to hang them in a ventilated place where there is no direct sun exposure. Remember to check that they are not damp when installing them, because this would generate bad odors.

 

Clean the helmet screen

Pour a small amount of neutral detergent on a damp cloth and rub it on the helmet screen; in this way you can remove the dirt accumulated by constant use. Immediately remove all excesses, trying not to expose it to water pressure. As recommended by the manufacturers, it is not appropriate to use non-specialized products, in order not to deteriorate the surface.

 

 

 

The most popular brands

 

If you are a fan of motorcycling or simply riding a motorcycle, it is your most reliable and practical method of transport, it will always be necessary that you remain fully protected to avoid any type of accidents or injuries that can cause different physical damages. That is why the use of a helmet should never be absent, since it would help you prevent possible bruises on the head.

It should be noted that today in the market there are an infinity of models and designs available, among which those sponsored by brands such as Astone Helmets, Romer and Viper stand out, so that considering them at the time of purchase would be your best option.

 

 

 

The Astone Helmets brand was developed by the RiderValley group in 2008. Since its inception, it has been in charge of manufacturing and marketing motorcycle helmets, maintaining an unbeatable quality in each of the products it produces for its most demanding customers.

Among its most outstanding products you can find full-face helmets and cross-over helmets, whose designs available in them have safety, comfort, functionality and aesthetics so that you can drive your motorcycle while being protected and above all in fashion.

Likewise, this brand manufactures all its products under the pertinent and current regulations capable of offering you the safety and comfort you deserve before each use. Best of all, it maintains an excellent quality-price ratio between its different products, so that being able to acquire them will be easier than you thought.

It should be noted that currently the Astone Helmets brand has a collection full of totally new and innovative models, capable of attracting the attention of anyone. In addition, they offer high quality materials, as well as a variety of colors and sizes so that you can acquire the right one for you.

 

 

 

Acquiring the accessories you need to be able to protect your life unconditionally will always be essential. Even more so when it comes to driving a motorcycle, where the helmet is a safety method that the same authorities require to be used to achieve the prevention of different types of accidents.

Thus, the Romer brand has been available in the market for several years offering different products aimed at the general public, where the manufacture of helmets is one of its main strengths thanks to the designs, materials and innovations it has.

On the other hand, this brand is available in different countries selling a wide range of products that undoubtedly provide an unconditional level of quality, also maintaining the same mission of guaranteeing each of its customers the best accessories they need for each type. of activity, be it the practice of some extreme sport such as motocross.

 

 

 

Founded 50 years ago, the Viper brand is a company that is located in the city of Barcelona with different offices in Spain, Andorra and Portugal, these being some of the countries where it currently operates and is listed as the number one brand in the distribution of sports products of great quality and durability.

It should be noted that it has a staff with a professional profile working in each of its factories, giving the best of itself to offer the general public top quality products, manufactured with the best and most resistant materials to guarantee a long life time. Useful.

Likewise, it distributes and markets the ideal products for you to carry out the practice of the sports you prefer, while maintaining a very affordable and competitive price in the market. On the other hand, it works with trusted suppliers to conveniently and adequately supply the latest innovation available in the different physical and virtual stores.

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *