Car Lights – Buying Guide, Opinions and Analysis
Out of prudence and caution, it is necessary to have car lights that provide proper lighting. Therefore, it is essential to keep the lighting system in good condition and change it in time when it fails. If your car needs new lights, it is preferable that you choose from the best ones. The Ltpag H7 are among the most recommended for their high quality and efficiency to illuminate with great clarity from long distances. Another useful alternative for emergencies is the Help Flash YR-42WR-PIOM , a practical pre-signaling tool that works automatically and serves as a flashlight.
Choosing new car lights, whether for the internal or external part of the vehicle, may seem very easy, but at the same time it is a task that could cause uncertainty, especially when countless options begin to appear. To make your choice easier, we present you a guide to buying the best car lights, where we point out some of the most notable characteristics that you should look for in this type of artifact.
If you want to have lights that guarantee efficiency, performance and durability, you should look at the type of materials that make up its structure. On repeated occasions, it happens that the lights go out or begin to fail soon after, so it is necessary to allocate another amount of money to replace them.
This is an unnecessary expense that you could save if, before choosing, you make a comparison of car lights that allows you to distinguish between all the proposals to know how they are manufactured.
Aluminum lights have the advantage that they act faster to dissipate heat and tend to resist high temperatures better. Some made of plastic can also be reliable, as this material is anticorrosive, resistant to shock and heat. Others, made of quartz, have the ability to withstand increased pressure and changes in temperature.
Another feature that you should look at when choosing lights for the car is their type of installation. It is convenient that you can do it quickly and easily, without requiring an extra technical service, because, even if you have bought good and cheap car lights, this could increase its cost.
In this sense, it is convenient that, before choosing, you make sure that your installation system is simple or, failing that, you have the guarantee of having the precise instructions and, at the same time, have the basic notions, in case requiring a more complex installation.
Nowadays, it is becoming more and more common to find models of modern bulbs or lamps that are installed simply, since they only need to be connected to function. Others, however, require several connections through different cables.
To choose car lights that are useful to you and you can make the most of them, you should first make sure that your car supports them, so that you can make a safe purchase and avoid wasting money on bulbs that are not compatible with the brand and model of your vehicle.
Likewise, it is advisable that you review all the factory details of the product to know, in addition, the size, capacity, power and type of voltage with which they are supplied.
Some newly designed car lights, as well as older ones, are of the standard and universal type, so they could be compatible with most cars with 12V power. However, there may be more models. modern, whose manufacturers recommend other types of more exclusive lights. Therefore, you should be aware of these specifications.
Car lights, whether they are placed inside or outside, are distinguished from each other because they usually illuminate in different ways, with greater or lesser intensity and with various shades. There are warm lights, whose illumination takes a whiter tone, which provides great brightness, with a color temperature that exceeds 3500 K.
Others offer a more natural white light tone, whose color temperature is between 4000 to 4500 K. Similarly, some have the ability to shine in a cold white light of the xenon type and their temperature ranges from 6000 to 7000 K .
Car lights are designed with different types of technology, although they all claim to provide higher performance and optimized efficiency. If you want to know how much some cost, you may find the answer according to the technology they use, as this is a characteristic that tends to affect the price.
Among the most widely used car lights today, there are the LED type, which are characterized by consuming less energy, illuminate more quickly and offer long hours of useful life. On the other hand, there are halogen lights, which continue to be the most widely used, partly because of their cost and easy installation. Also, you can find xenon ones, which have the ability to shine on the road with a higher power and intensity.
Frequently asked questions
Q1: How to use a car lights?
The way you use your car lights will depend on the model you choose and the car you own. In this sense, we will proceed to verify that all the bulbs and elements that the manufacturer announced in the purchase are included. If it has not been done, the installation area must be verified, whether it is a sector of the exterior or interior of the car, to connect the corresponding cables or simply connect, if it is a plug and play option. The good condition of the structure must always be supervised, carrying out periodic cleaning if necessary.
Q2: How to regulate the car lights?
To regulate the car lights it is necessary to check the alignment of the headlights and adjust their height. The car should be leveled on flat ground, parked about 30 cm from a white wall. Turn on the lights and mark with a “T” on the wall, the area that illuminates the most. Go back 10 meters and check that the center of the light stays in the same place. To adjust the height of the headlights, use the mark on the wall as a reference and draw another line 5 cm below it, which will indicate the exact height they should be. To continue, use the adjusting screws to horizontally adjust, raise or lower the headlights, and turn them until the headlights match the markings.
Q3: What are adaptive lights in a car?
Adaptive lights are those that are placed in the car so that they turn and illuminate while the steering wheel is maneuvered in any direction, that is, they do not shine in a straight line like all lights, but rather adapt to the movement of the car . These are ideal for better visibility at night, when the car is moving between curves and intersections.
Q4: How to clean the car lights?
To clean the car lights it is advisable to park the vehicle on a flat area with sufficient clarity. These lights can be cleaned by scrubbing with a sponge dipped in warm water and a little soap. It is advisable to use a clean and dry cotton cloth to dry the lights and polish the glass that covers them, to finish with the cleaning.
Q5: How to change the car lights?
Some models of lights have a more complex installation system, so it would be advisable to go to the service of specialized personnel to carry out this task with greater safety. Halogen lights, on the other hand, could be easier to change, since the protective rubber must be removed and the power supply disabled. To continue, it is necessary to turn the bulb and pull it to remove it and then insert the new one.
Q6: What happens if you leave the car lights on?
If the car lights are left on for long hours or overnight, there is a high probability that the battery power will drain very quickly and even the full charge could be lost if the battery is more than two years old. use.
Q7: What lights does my car have?
Most cars today use LED, halogen or xenon lights. Although they may vary from one model to another, their objective is the same. Cars have hazard lights, brake lights, signal lights, and daytime running lights. They also have long lights for the road and short lights for crossings.
They also have position lights, as well as fog lights, both front and rear. If you want to know exactly what type of lights your car has, there are online search engines that, depending on the make and model, offer a result that indicates the description of the factory-installed lights.
Q8: How to remove the flashing of the LED lights in the car?
One of the reasons why LED lights flicker is because they have such low energy consumption that the vehicle cannot recognize when there is such a bulb. An effective way to eliminate the flickering of the LED lights in the car is to use bulbs with Canbus system, as these have a resistance that consumes some power. In this way, the car can detect it and function properly.
Which car lights shine the most?
The evolution of technology has modified the front of our vehicles, both in its appearance and in the lighting that we currently use. Lights that have evolved from filament models to products such as LEDs or lasers, whose lighting capacity increases almost at the same time as our safety.
Among the advances that have helped drivers to ride more safely are elements such as seat belts, airbags or ABS. There are also others that help us drive safer such as the lights on our vehicle, which help us see everything more clearly. A field in which novelties have been happening in recent years. So much so that halogen lights are almost on the way to extinction, surpassed by options that allow you to see much further and more safely.
It is obvious that in this context it is difficult to decide what are the best car lights that we can use. However, with sufficient knowledge, it will be possible for you to know what to expect from each of these technologies and which one to turn to to shoot with greater safety. So, without further ado, we proceed with the analysis.
If your car is more than 10 years old, it will most likely fit one of these lights. Halogen lamps were, in their day, the product that came to replace the old filament lights. Among its advantages was a higher quality lighting, with less dazzling capacity, and an estimated road range of approximately 60 meters.
Among its drawbacks is that its halo of light does not allow a sweep as wide as that of the most modern lights, which also considerably reduce consumption compared to that of these halogen bulbs. As if that were not enough, halogen bulbs generate a rather yellowish light, which can alter the way we see objects on the road.
The successors to halogen lights are xenon headlights. This product includes a complete change in approach, as light is generated by a gas discharge system and a chemical reaction of different halogen gases and metals. It was first assembled in 1991, although the truth is that its fame took a long time to arrive. Among its advantages, the range stands out, which is extended to approximately 90 meters. But what is most noticeable of the change is in the tone of the light, between white and violet, which allows us to see things much more clearly.
As additional benefits, these lights also significantly reduce energy consumption compared to halogen models, while the useful life is multiplied by five in the case of xenon. A durability that compensates for the higher cost of this type of lamp compared to halogen models. In addition, they are systems that must be treated with special care to avoid breakdowns.
LED lights had been the latest novelty on the market until the advent of laser lights. In this segment, we have two different products. One of them is LED lights with conventional bulbs, similar to the ones we have at home. The other design is that of LED matrix lights, which incorporate numerous bulbs duly mounted in their structure. Both lights have a high lighting capacity, especially the second system, with an estimated range of approximately 300 meters.
In addition to the distance, these bulbs also have the advantage of further reducing consumption and maintenance costs. In the case of products with matrix technology, an extra is added: the ability to direct that beam of light where it is needed, so that safety is triggered. Now the headlights are directed directly where it is necessary to shine, depending on where we drive. Even the switch between high and low beam disappears, as it occurs almost automatically. Ideal therefore to roll with great safety and less complications.
The latest novelty in this sector are laser lights. This product is only present today in ultra-premium range lights and will be until it becomes popular. In fact, when they were launched in 2015 for the Bmw i8, the lights cost close to 12,000 euros. Although seeing their functions, the truth is that they provide interesting news.
Among its advantages, it stands out a range of no less than 600 meters away, with the active system that we have discussed. A light that offers a very pleasant and high intensity white color, which does not modify what is seen on the road. On the other hand, the lights have a highly aerodynamic and compact format, so that designers gain even more space to adjust the front area of the vehicle. A series of high-level advantages that in a few years will become common in all types of vehicles.
What lights to choose
At this point, you probably already know which lights are right for your vehicle. But unfortunately we have bad news. The main problem when changing the lights of our vehicle for a different technology has to do with the complicated process of reform and modification of these lights. If your car has halogen lights, for example, and you want to change them for LED or Xenon lights, you will have to buy those lights, install them and legalize this reform in the ITV.
This entire process has a considerable cost, since it is necessary to cover the price of the parts, the approval of these lights and also the installation itself, in addition to passing the corresponding ITV. A process that will cost you money and time. It’s all a matter of assessing whether that change is worth it.